Filter
Top Products
VIEWING IMAGES ON A COMPUTER
193
5.
Turn off the camera, and connect the USB
cable that comes bundled with the camera to
the camera’s [USB/AV] port and your
computer’s USB port.
• When connecting the USB cable to the camera,
make sure the ̆ symbol on the camera’s [USB/AV]
port is aligned with the ̆ symbol on the USB cable
plug.
2.
Turn on the camera, and then press [MENU].
• It makes no difference whether the camera is in a
REC mode or the PLAY mode.
3.
Select the “Set Up” tab, select “USB”, and
then press [̈].
4.
Use [̆] and [̄] to select “Mass Storage”, and
then press [SET].
USB/AV
USB port
Connector (A) USB cable (bundled)
[USB/AV]
̆
symbols