Filter
Top Products
111
OTHER RECORDING FUNCTIONS
Instant Movie Setups
(MOVIE BEST SHOT Mode)
Selecting one of the MOVIE BEST SHOT sample scenes
automatically sets up the camera for recording a similar
type of movie.
1.
Align the mode dial with “ ”.
• This enters the MOVIE BEST SHOT Mode and
causes “ ” to appear on the monitor screen.
2.
Use [̇] and [̈] to select the sample scene
you want, and then press [SET].
• If you want to change to a different sample scene at
this point, press [SET] again. Pressing [SET] also
displays the currently selected scene.
3.
Point the camera at the subject and then
press the shutter button.
4.
To stop movie recording, press the shutter
button again.
• The effects of camera movement in an image become
more pronounced when you record close ups or recording
with a large zoom factor. Because of this, use of a tripod
is recommended when recording close ups or recording
with a large zoom factor.
• Images may be out of focus if the subject is outside the
shooting range of the camera.
• Certain types of subjects are difficult to focus (page 65)
and may cause blurry images. If this happens, try
changing the focus mode to Manual Focus (page 86) or
Pan Focus (page 85).
• If images are out of focus when using Auto Focus, you
may be able to achieve proper focus by pointing the
camera at another subject momentarily.
• Performing zoom, Auto Focus, or other operations during
recording can cause operation noise to be recorded in the
movie audio. Auto Focus operation noise can be
eliminated by selecting Manual Focus (page 86) or Pan
Focus (page 85) as the focus mode, because Auto Focus
is not performed in these modes.