Filter
Top Products
99
OTHER RECORDING FUNCTIONS
Using Manual Assist On-screen Guidance
Pressing [SET] while in the A mode (aperture priority AE),
S mode (shutter speed priority AE), or M mode (manual
exposure) causes on-screen guidance and exposure indicators
(aperture and shutter speed) to appear on the display.
Guidance images
Aperture indicator
Shutter speed indicator
• In the A mode, you can use [̇] and [̈] to change the
aperture value setting. Pressing a button causes the
Guidance images to disappear from the display.
• In the S mode, you can use [̇] and [̈] to change the
shutter speed setting. Pressing a button causes the
Guidance images to disappear from the display.
• In the M mode, you can use [̆] and [̄] to switch the
Guidance images between the aperture value and shutter
speed settings. After displaying the screen you want, you
can use [̇] and [̈] to change the setting.
• If the Guidance images disappear from the monitor
screen, you can display them again by pressing [DISP].
IMPORTANT!
• The shutter speed displayed in the A mode and the
aperture value displayed in the S mode are rough
approximations only. Because of this, these settings
may be slightly different from the settings that appear
when you press the shutter button half way (which
are more precise).