Filter
Top Products
Setting Up Your Scanner
15
If You’re Running Windows 2000 . . .
1. Make sure your scanner is plugged
into a power source and connected
to your computer; then turn on
your computer. The Found New
Hardware Wizard screen appears:
2. Insert the scanner software
CD-ROM in the CD-ROM or
DVD drive, then click
Next
.
3. Select
Search for a suitable
driver for my device
, then click
Next
.
4. Check
CD-ROM drives
only, then
click
Next
.
basics.book Page 15 Monday, October 23, 2000 11:35 AM