Filter
Top Products
Problem Solving
53
A line of dots always appears in
the scanned image.
Check to see if the document table
is dusty or scratched. Clean the
document table glass as described
on page 41.
Your printed image is larger or
smaller than the original size.
You may have changed the
resolution or scaled your image.
Check the image size settings in
your application to determine the
actual size your image will be when
it is printed.
You cannot print your image or
the printout is garbled.
■ Check the image size of your file
to see if it is too large. Make
sure that your computer has
enough memory for your
software. If there are many
device drivers on your system,
you are running multiple
programs at the same time, or
you have little free space on
your hard drive, your computer
may not have enough memory
available. (See your software and
computer documentation.)
■ Check that the printer is
properly connected to the
computer and is correctly set
up. (See your printer manual.)
■ Check that your software is
properly installed and set up for
your printer. (See your software
manual.)
basics.book Page 53 Monday, October 23, 2000 11:35 AM