44
Problem Solving
The light indicates the status of the scanner. If an error occurs, the scanner stops
operating and the light shows the type of error.
Scanner light
Light Color Status
Slowly flashing Green The scanner is initializing or busy scanning.
On Green The scanner is ready to scan images.
On Red The scanner has received incorrect commands from
your scanning software.
When this error occurs, try to rescan the document.
The scanner returns to normal when it receives correct
commands. Normally you do not need to reset the
scanner when this type of error occurs.
Flashing Red The scanner may not be properly connected to the
computer. Unplug the scanner from its power source,
remove the USB cable, and then plug them back in.
If this does not eliminate the error, one of the following
may be the problem:
■ The fluorescent lamp needs to be replaced.
■ The scanner is malfunctioning.
Consult your dealer or EPSON.
Off — The scanner or AC adapter is unplugged.
Scanner buttons
Button Function
]
Start
Scan directly to EPSON Smart Panel or a Smart Panel application.
See your
Reference Guide
for more information.
t
Copy
Scan directly to the Copy utility in EPSON Smart Panel and print on
your EPSON ink jet printer.
s
Scan
Scan directly to Adobe PhotoDeluxe.
basics.book Page 44 Monday, October 23, 2000 11:35 AM