Filter
Top Products
1-4 Getting Started
4 If you want to connect your printer and PhotoPlus
scanner to the same port, plug the printer cable into
the PhotoPlus parallel connector as shown and
tighten the screws.
:
5 Plug the PhotoPlus power adapter into a grounded
electrical outlet. To protect the scanner from
interference, it’s best to use a surge protector.
NOTE
The scanning head on your PhotoPlus may loosen during
shipping. Before you scan, push down to make sure it’s firmly
seated on the base. For information on removing and replacing
the scanning head, see pages 9-2 to 9-4.
Installing Your Installing Your FFun Pakun Pak Software Suite Software Suite
The PhotoPlus Fun Pak provides everything you need to
get creative with scanned images. A single CD-ROM
includes these four software applications: EPSON
PhotoPlus 2.0 software, Sierra Print Artist 3.0, PrintPaks
Magnet Kit, and Corex CardScan SE.
Follow these steps to install the software from your
CD-ROM:
1 Insert the PhotoPlus Fun Pak CD in your CD-ROM
drive.
2 From the Windows 3.1 Program Manager screen,
choose RunRun from the File menu.
In Windows 95, click the Start button, and then click
Run.
3 In the box, type: D:\INSTALLD:\INSTALL. If your CD-ROM drive
is not drive D, substitute the correct letter.
4 Click OK. You see the main installation screen.
printer cable
php_1.fm5 Page 4 Monday, July 8, 1996 3:05 PM