PrintPaks Magnet Kit: Family Stuff 7-7
A
B
7
Follow these steps:
1 To test your magnet designs, make sure you have
regular paper in your printer’s tray. Don’t take out
the paper or load the special coated paper. Just click
the red button to go on to the next screen:
2 Click the red button to print your test sheet.
3 If you want to print another test, click the blue
button and repeat steps 1 and 2.
4 When you’re satisfied with your test print, remove
the regular paper and load a sheet of the special
Magnet Kit paper, following the instructions on the
screen.
5 Click the blue button to print. You may need to
gently guide the special paper into the printer by
hand.
6 When you’re finished printing, click the red button
to go on.
Putting Your Magnets TogetherPutting Your Magnets Together
After your designs are printed, you need to trim the
paper, attach it to the adhesive magnet sheet, and cut
out the magnets. Colorful animation on the screen
shows you exactly what to do.
php_7.fm5 Page 7 Monday, July 8, 1996 3:30 PM