Filter
Top Products
47
R4CF95P
SHORT.bk Rev. D
BLUE.FM A5 size
2/15/05
R
Proof Sign-off:
H. Yamasaki CRE Nakano
M. Otsuka
editor name
English
Making settings
1. Connect the Bluetooth Photo Print Adapter to
your printer.
& See “Connecting and Disconnecting the
Bluetooth Photo Print Adapter” on page 45
c
Caution:
Be sure that the printer is not operating
before connecting this product. Otherwise,
the printer may malfunction.
2. Press Menu.
3. Press or to select Setup, then press to
open the menu.
4. Press or to select Bluetooth, then press .
5. Change the settings of each item. See “Outline of
settings” on page 46 for information about
Bluetooth settings.
The Bluetooth Passkey Setting (PIN Code Set)
If you select Pairing as the Connectivity Mode or On
as the BT Encryption setting, the Passkey must be
entered into a Bluetooth wireless-capable device
before it can communicate with and print from the
printer. The default Passkey is 0000.
To change the Passkey, follow the instructions below.
A Passkey of 1234 is used as an example.
BT Encryption On/Off
(Default = Off)
Select On to encrypt
communication. Encryption
requires that the four-digit
Passkey be entered into a
device before it can
communicate with and print
from the printer.
PIN Code Set Any four-digit
number
(Default =
0000)
The Passkey setting allows you
to set the four-digit Passkey
that must be entered into a
device before printing if
Bonding is selected as the
Communication Mode or if
Encryption is On.
BT Device
Address
Set at the
factory
(Example)
11-11-11-11-1
1-11
Displays the unique Bluetooth
Device Address of the printer.