Epson PictureMate 500 Photo Printer User Manual


 
8 Safety Instructions
L
Proof Sign-off:
H. Yamasaki CRE Nakano
M. Otsuka
editor name
R4CF95P
SHORT.bk Rev. D
SAFE.FM A5 size
2/15/05
Never disassemble, modify, or attempt to repair
the AC adapter, power cord, printer, and options
by yourself except as specifically explained in the
printer's guides.
Unplug the printer and the AC adapter, remove
the optional battery from the printer, and refer
servicing to qualified service personnel under the
following conditions:
The power cord or plug is damaged; liquid has
entered the printer, the AC adapter, or the
optional battery; the printer, the AC adapter or
the optional battery has been dropped or the
casing damaged; the printer, the AC adapter or
the optional battery does not operate normally or
exhibits a distinct change in performance. (Do not
adjust controls that are not covered by the
operating instructions.)
Do not use with wet hands.
If you plan to use the AC adapter or the optional
battery in Germany, the building installation
must be protected by a10 or 16 amp circuit breaker
to provide adequate short-circuit protection and
over-current protection for this printer.
When using the printer
Observe the following when using the printer:
If you use the printer in places where the use of
electronic devices is limited, such as in airplanes
or hospitals, follow all instructions in those
places.
Do not insert objects through the slots in the
printer.
Take care not to spill liquid on the printer and the
AC adapter.
Do not put your hand inside the printer or touch
the photo cartridge during printing.
Always turn the printer off using the On button.
Do not unplug the printer or turn off the power to
the outlet until the power light goes out.
Before transporting the printer, make sure that the
photo cartridge is in place.
Leave the photo cartridge installed. Removing the
cartridge can dehydrate the print head and may
prevent the printer from printing.