Filter
Top Products
162
Troubleshooting
ZConnecting
ZOthers
Matters Problems Possible causes Solutions Page
Connecting to TV
There is no image
or sound on the
TV.
The camera is not connected to the TV
correctly.
Connect the camera and TV correctly.
132
The included A/V cable was connected
during movie playback.
After the movie playback mode is stopped,
connect the camera and TV correctly.
119,
132
“TV” is selected as the TV input. Set the TV input to “VIDEO”. –
The video output setting is incorrect. Change the setting to [NTSC] or [PAL]. 121,
124
The TV volume is turned down. Adjust the volume. –
The TV image is
black and white.
The video output setting is incorrect. Change the setting to [NTSC] or [PAL]. 121,
124
Connecting to PC
PC does not
recognize the
camera.
The USB cable is not correctly connected
to the PC or camera.
Set up the camera, and connect the USB
cable correctly. 143
Connecting to
printer
Cannot print with
PictBridge.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
• Set up the camera, and connect the USB
cable correctly.
• Turn the printer on.
134
Matters Problems Possible causes Solutions Page
Camera operation
etc.
Nothing happens
when pressing the
buttons on the
camera.
Camera malfunction may be caused
temporarily.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
19,
133,
The battery has run out. Load new or fully charged battery. 18, 19
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.
19,
133,
172