Filter
Top Products
60
Setting Shooting Mode
MEMO
• Program shift can be used when Suppressed flash
(➝p.77) is set in flash mode.
• The shutter speed and aperture setting appear in yellow
when the camera is in Program shift mode.
• Any of following cancels Program shift:
- Changing the Mode dial setting
- Setting the camera to Playback mode
- Turning the camera off
- Popping the flash up
CAUTION
Program shift cannot be used when [ DYNAMIC
RANGE] is set to [AUTO], and [S ISO] is set to
[AUTO(400)], [AUTO(800)] or [AUTO(1600)].
M Shutter Priority AE
This is an automatic mode to set the shutter speed.
Use this mode to freeze a moving subject (fast shutter
speed) or convey the impression of movement (slow
shutter speed).
CHECK
• See p.54 for the available settings of Shooting mode.
• See p.77-78 for information on the available flash
modes.
ZSetting the shutter speed
BPress the shutter button to take
pictures.
ISO
ISO
400
400
When the brightness of the
subject is outside the camera’s
brightness metering range, [---]
appears as the shutter speed and
aperture setting on the screen.
ARotate the command dial to select the
shutter speed.
BPress the shutter button to take
pictures.
F2.8
F2.8
2000
2000
ISO
ISO
400
400
Shutter speed