FujiFilm S100FS Digital Camera User Manual


 
167
Continued Q
Battery NP-140
Nominal voltage DC 7.2V
Nominal capacity 1150 mAh
Operating
temperature
0°C to +40°C
(+32°F to +104°F)
Dimensions 35.5 mm × 56.0 mm × 13.3 mm
(1.4 in. × 2.2 in. × 0.5 in.)(W × H × D)
Mass (Weight) Approx. 47 g (1.5 oz.)
Battery Charger BC-140
Rated input 100-240 V AC, 50/60 Hz
Input capacity 7.8 W
Rated output DC 8.4 V, 720 mA
Applicable batteries Rechargeable Battery NP-140
Charging time Approx. 2.1 hrs.
Operating
temperatures
0°C to + 40°C
(+ 32°F to + 104°F)
Dimensions 68 mm × 84 mm × 28 mm
(2.7 in. × 3.3 in. × 1.1 in.) (W × H × D)
Mass (Weight) Approx. 83 g (2.7 oz.)
(not including battery)
Notes on Using the Battery Charger
The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
Do not use the battery charger to charge batteries other
than rechargeable battery NP-140.
The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
Do not leave the battery charger in the following types
of locations:
Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
Places with strong vibration
In very dusty places
The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.