Filter
Top Products
• You may have zoomed in too far using digital zoom (see “Digital zoom”
on page 15).
• If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory. If so,
transfer the images to the memory card (see Move Images to Card under “
Using the
Playback Menu” on page 26).
I have two memory cards that are the same size, but one stores many more pictures
than the other.
• Your memory card may contain files that are not images or videos recognized by the
camera. Save any data on the memory card that you want to keep, then format the
memory card (see “
Install and format an optional memory card” on page 7).
• If your memory cards are 4GB or larger, the card that stores fewer images may have
been improperly formatted by a device that does not support 4GB or larger cards. A
new type of High Capacity Secure Digital (marked SDHC) memory card is now
available that prevents improper formatting and use by devices not supporting 4GB
or larger cards. Try formatting the card in this camera, which supports High Capacity
Secure Digital cards.
• Your memory card may be defective. If you have formatted your memory card in the
camera and it does not show the expected capacity, consider replacing the memory
card.
My camera indicates I can store 1999 images regardless of the Image Quality
setting.
When you turn on your camera with an empty memory card installed, the camera
indicates the number of images you can put on the memory card at the current
Image
Quality setting. This camera supports storing a maximum of 1999 images on a memory
card.
It takes a long time to "Delete All" images from my memory card.
Having a large number of images stored on a memory card increases the time the camera
takes to delete them. Instead of deleting them, format the memory card (see “
Install and
format an optional memory card” on page 7).
The Power light is on but the Image Display is off, or the camera seems stuck and
won’t operate.
•Slide
to a different position or press any camera button to reactivate the
Image Display.
• Reset the camera (see “
Resetting the camera” on page 44 ).
Chapter 9
48 Troubleshooting