Filter
Top Products
Charge the battery
To charge the battery in the camera:
1. Plug the small end of the USB
cable into the camera and the
large end into the power
adapter, then plug the power
adapter into an electrical
outlet, as shown.
The camera's blinking Battery
Charging light indicates that
the battery is charging. The
battery is fully charged when
the Battery Charging light turns on solid (see “
Recharging the Lithium Ion battery”
on page 55 for information on charging times).
2. When charging is complete, disconnect the camera from the power adapter.
NOTE: For other methods for recharging the battery, see “Recharging the Lithium
Ion battery” on page 55.
Turn on the camera
To turn on the camera, press the button.
Choose the language
1. Using your finger or the stylus, touch the language you want.
2. Touch Next on the language confirmation screen
to confirm your choice and display the
Region screen.
To change the language later, use the
Camera
Setup Menu (see “
Using the Camera Setup Menu”
on page 42).
Set the region
Along with the language setting, the region setting determines the default date format.
1. Touch the region you want.
2. Touch Next on the region confirmation screen to
confirm your choice and display the
Date
screen.
Chapter 1
6 Getting started