Filter
Top Products
Set the date and time
Accurately setting the date and time will help you locate images once you have transferred
them to your computer, and will ensure that images are accurately marked if you use the
date and time imprint feature. See Date & Time Imprint under “
Using the Picture Capture
and Video Record menus” on page 18.
1.
Touch
or to adjust the month, date, and
year.
2. Touch Next to confirm your settings and display
the
Time screen.
3.
Touch
or to adjust the time.
4. When all settings are correct, touch Done.
To change the date and time later, use the
Camera
Setup Menu (see “
Using the Camera Setup Menu”
on page 42).
Install and format an optional memory card
This camera supports standard, high speed, and high capacity Secure Digital (SD and
SDHC) memory cards, 32MB to 8GB.
1. Turn off the camera and open the
Battery/Memory Card door.
2. Insert the optional memory card in the
smaller slot as shown. Make sure the
memory card snaps into place.
3. Close the Battery/Memory Card door
and turn on the camera.
NOTE: When you turn on your camera
with a memory card installed, the
camera indicates the number of picture
and video images you can store on the
memory card at the current
Image
Quality setting. This camera supports
storing a maximum of 1999 images on a
memory card.
Always format new memory cards before first use. Formatting removes all images from
the memory card, so make sure to transfer existing images before formatting (see
“
Transferring and printing images” on page 34).
1. With the camera turned on, slide
to .
2.
Touch
.
3. Touch
to display Format Card, then touch Format Card.
4. Touch Yes to format the card.
NOTE: Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view images
stored there, remove the memory card. To transfer images from internal memory to
an optional memory card, see Move Images to Card under “
Using the Playback
Menu” on page 26.
Before taking pictures 7