HP (Hewlett-Packard) R930 Digital Camera User Manual


 
The following table shows the average recharge time for a fully discharged battery, based on
recharge location.
Charge location
Average
charge time
Signals
In camera connected to AC
power via the power
adapter
2–3 hours Charging: Camera's battery charging light blinks
and the animated battery icon is displayed.
Charging complete: Camera's battery charging
light turns on solid and the battery gauge changes
to
on the Image Display.
In camera connected to a
computer or printer via the
USB cable
4–6 hours Charging: For most computers and printers,
camera's battery charging light blinks and the
animated battery icon is displayed, but see the
note at the end of this table.
Charging complete: Camera's battery charging
light turns on solid and the battery gauge changes
to
on the Image Display.
In an HP Photosmart R-
Series quick recharger
1 hour Charging: Quick recharger light is yellow.
Charging complete: Quick recharger light is
green.
NOTE: Some printers and computers provide lower power via the USB connection. If you are
charging using the USB cable connected to one of these printers or computers, the camera's
battery charging light may not blink while the battery is charging, but will turn on solid when
charging is complete.
Safety precautions for recharging batteries
You can recharge a Lithium Ion battery in the camera or purchase an optional quick recharger. These
devices may be warm while charging a Lithium Ion battery. This is normal. However, you should
follow the safety precautions below.
Do not charge any other battery than the HP Photosmart R07 Lithium Ion battery in the camera
or quick recharger.
Insert the Lithium Ion battery in the correct orientation.
Use the camera or quick recharger in a dry location only.
Do not charge a Lithium Ion battery in a hot location, such as in direct sunlight or near a fire.
When recharging a Lithium Ion battery, do not cover the camera or quick recharger.
Do not operate the camera or quick recharger if the Lithium Ion battery appears damaged.
Do not disassemble the camera or quick recharger.
Unplug the quick recharger from the electrical outlet before cleaning it.
After extensive use, the Lithium Ion battery may begin to swell. If it becomes difficult to insert
the battery into or remove the battery from the camera or quick recharger, discontinue use of
the battery and replace it with a new one. Please recycle the old battery.
Appendix A
56 Managing batteries