Filter
Top Products
Disc or Card Management
INITIALIZING DISC OR CARD (FORMAT DISC. FORMAT CARD)
Initializing DVD RAM disc o1" card will allow you to delete any recorded contents.
Before You Begin
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialization. If the DVD video camera/recorder is turned off
during initialization and the initialization is interrupted, incorrect
initialization wiii result and the incorrectly initialized disc will be
unusable.
• If you use a brand-new DVD-R disc, message "Disc is not formatted"
will appear: Initialize the disc, following the subsequent messages
(p. 46).
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Use "Operating Menu" (p. 64) to choose
"Format Disc" o1""Format Card" on the
"Disc" o1""Card" menu screen, and then press
the )"/|| button.
The screen for verit_fing "Format Disc" or
"Format Card" will appear.
4 Choose "YES", and then press the I1_/||
button.
Choose "NO" to cancel initialization.
Note:
• if you wish to delete all recorded contents, it is
recommended that you use initialization, which wilI
delete aII the scenes in much tess time than using the
scene delete function
• Initialization will deIete all the recorded contents on
disc or card: Be careful not to detete data by mistake.
• it may not be possible to initiaIize a disc with many
scratches or dirt: Such a disc cannot be used (p 26).
• This DVD video camera/recorder may not recognize
some discs or cards that have been initialized on PC
or a device other than this DVD video camera/
recorder
• if you attempt to initiaIize a disc or card in this DVD
video camera/recorder when it is connected to PC via
PC connection cane, the disc or card may not be
initialized and may be unusable on this DVD video
camera/recorder (for DZ-GX2OA or DZ-MV780A only)
iFomst Oisc i
(When using (When using card)
DVD-RAM disc)
132