Filter
Top Products
VIEWING ON TV SCREEN
1Tt..ntileTVon ,nd tile,np, ,tselecto,"to
"VCR" whichever applicable Video input.
Re%r to the TV instruction manual fur how to
switch tile TV input.
2 Turn tile DVD video camera/recorder on.
The image that the DVD video camera/
recorder is seeing will appear on the TV
sci'een.
You can also monitor tile image on the LCD
screen or viewfinder of the DVD video
C_t I11 el'a / Fec 0 I'd e I\
3Perform playback, recording or editing.
You can per%rm playback, editing or editing
on Disc Navigation while checking on TV
screen.
Note:
• Adjust the volume of sound on TV
• The infrared remote control is useful when operating
the DVD video camera/recorder white viewing an
image on TV screen. However, if you use a Hitachi
VCR, the remote control may inadvertently operate
the VCR if it is near the DVD video camera/recorder.
To prevent this, set the remote control code of the
VCR to a position other than "VCR2".
• Information that the DVD video camera/recorder is
recording wiIt appear on the TV screen: You can aIso
display onty part of information or switch off the
display Refer to "SETTING ON-SCREEN DISPLAY
OUTPUT ON OR OFF (OSD OUTPUT)" on page 97,
and press the DISPLAY button to switch the display
status
• When copy-guarded disc isplayed back, no image will
appear on TV screen.
• If you use TV with wide mode (aspect ratio 16:9) and
set the TV to the wide mode, the entire Disc
Navigation display may not be displayed on the TV
screen If this happens, release the wide mode setting
on TV (see the TV instruction manual for releasing the
wide mode)
78