Hitachi DZ-MV780A Camcorder Accessories User Manual


 
Card ful!. Delete unnecessary stills and try the card, or use another card.
No more recording on this card can be done: Delete unnecessary
stills or use another card.
Delete unnecessary stills and try the card, or use another card.
29, II0
Card full.
Cannot execute. 29, 1I0
Card is not formatted. Was the card formatted on PC? When using the card on this DVD
I32
Format the card now? video camera/recorder, choose "YES" and format it.
CHECK DiSC A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged. 25, I33
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
Control Information Mismatch may occur between the recorded image and scene
Error. information. I34
Update the control information.
Use another disc.
See *3 on page 166. 24, 26
COPY PROTECTED The video signal input to this DVD video camera/recorder may be
copy-guarded.
Some prerecorded video materials, such as movies, are guarded 80
against copying.
Copy-guarded materials cannot be recorded on this DVD video
camera/recorder.
DISC ACCESS The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the 49, 51
DVD video camera/recorder.
This DVD video camera/recorder is verifying whether the correct
disc has been inserted. I58
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
DISC ALMOST FULL Remaining free space on disc is less than I minute of video or 10 28, II0
3hotos: Delete unnecessary scenes or use another disc.
Disc error has occurred. Disc error occurred during finalizing, and finalizing failed.
Finalizing is not Replace the disc. I35
complete. See *3 on page 166.
Disc error has occurred. Has the disc been initialized on PC? Has initializing the disc on
Format the disc now? PC been interrupted?
Choose "YES" and initialize the disc when using it on this DVD I32
video camera/recorder. Initializing the disc will erase all data on
it.
See *2 on page 166.
Disc error has occurred. The disc may be dirty.
Formatting is not Remove the disc and wipe off fingerprints, dust, etc. before
complete, reusing it, or use another disc. 26, I32
This message may also appear if you insert a disc for which
formatting was interrupted midway, in this case, use another disc.
Disc error has occurred. Disc error could have occurred during editing of scenes.
Keep disc inside & Turn off the DVD video camera/recorder with the disc being used
43
restart, in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
162