Filter
Top Products
PROTECTING DISC FROM WRITING (PROTECT DISC)
You can protect a DVD RAM disc in order to prevent recorded images fl_ombeing erased or edited
by mistake. Fnrther recording will not be possible oil protected disc nntil tile protection is released.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use "Operating Menu"
(p. 64)to choose
"Protect Disc" on the
"Disc" 1]lent/ screen,
and then press the I_'/||
hutton.
4The screen tbr
verif}?ing protection
will appear:
Choose "YES", and
then press tile )/11
hntton.
ITT_÷dTs_
Choose "NO" to
cancel protection.
After "YES" o1""NO"
setting, the Disc
Navigation screen will
be restored.
Disc protecticon
Note:
• To release disc protection, perform the same
procedure as above: The screen for vedfying the
release of protection will appear
Choose "YES" to release the protection.
• If disc protection has been engaged on another
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection
VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)
You can find ont how long you will be able to record on one side of disc o1"on card.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use "Operating Menu" (p. 64) to choose
"Capacity" on the "Disc" or "Card" menu
screen, and then press tile I_/|| button.
(When using disc) (Whenusing card)
4Press tile • bntton to quit.
Tile Disc Navigation screen will be restored.
Note:
With a write-protected disc (see "Terminology", p. 155)
or locked card, the remaining space will always be
displayed as "O"
"1 With DVD-R disc: The quality mode first used for
recording with disc will appear.
*2With DVD-R disc: This will not be displayed.
133