Filter
Top Products
Recording Stills
Note:
Recording of stilt images is possible on DVD-RAM disc
and card.
ACCESS/PC
indicator
__ PHOTO button
CARD ACCESS indicator
5 Press the PHOTO botton all the way (full
pressing).
Tile screen will be black, and then the
recorded still will be displayed. When the
'0 I1" mark appears, you can proceed with
tile next recording; while "DISC ACCESS" o1"
"CARD ACCESS" is being displayed, you
cannot proceed with the next recording.
Note:
• If you wish to record without locating a subject at the
center of screen, first locate the subject at the center
1Remove tile lens cap, and then point tile DVD
of screen, press the PHOTO button halfway down,
determine the composition to be recorded, and then
press the PHOTO button all the way down
• If you press the PHOTO button all the way down at
one stroke without pressing tt hatf way, recording wiIt
be possible, but the focus witl be incorrect.
• See ':SIZE AND QUAMTY OF PHOTOS " on page 30
for details of photos on card
• See ':Check 2" on page 158 if recording photos is not
possibte.
• Shake of the DVD video camera/recorder may cause
blur in recorded image
video camera/recorder at subject.
2Turn the DVD camera/recorder on.
When using DVD RAM disc:
Set the power switch to '1"1".
When using card:
Set the power switch to "lg_".
After the ACCESS indicator goes out,
perform the subsequent operation:
3 Check the subject on the screen (viewfinder
or LCD).
When using the viewfinder, ptfll it out and
close the LCD monitor.
• When holding the DVD video camera/recorder for
recording, grasp it securely with both hands.
• When recording with higher zoom magnification, it is
recommended that you secure the DVD video
camera/recorder on a tripod
• Do not operate the power switch or remove the card
white the ACCESS/PC or CARD ACCESS indicator is
lit or btinking: Doing so may damage the card or the
data on card.
• The range of screen tn wNch recording is possible witt
be different for movie and still.
• If focusing is difficult with auto focus, choose manual
focus, and manually correct the focus before
recording (see page 72)
• There may be a difference between the image you
see on the LCD screen or vtewfinder and the
recorded image.
4Press the PHOTO button halfway (half
pressing).
The DVD video camera/recoMer will
automatically focus on the subject at the
center of screen, and the "OI1" indicator on
screen will light in purple (the focus will not
change v,;hen manual focus is chosen).
51