Filter
Top Products
Playing Back
insert a disc or card recorded on this DVDvideo camera/recorder (p. 49,
Before You Begin 51).
Turn the DVDvideo camera/recorder on (p. 44).
PLAYING BACK
Use _ / _ / _ / _ to select,
and then press 1_/11to designate
2
Press the I_/11 button in the recording pause
StTItt/S.
The DVD video camera/recorder will enter
the playback mode, and tile scene you have
recorded last will be played back (For
'scene", see p 103 and 'Terminology",
17. 155.)
When playback is finished, the DVD video
camera/recorder will enter the pause status
at the last image on disc.
If the playback pause stares continues fbr as
long as 5 minutes, the DVD video camera/
recorder will automatically return to the
recording pause status.
Press the • button
Playback will stop, and recording pause
stares will be restored
Note:
• If the LCD monitor is open during playback of movie,
playback sound will be heard from the speaker. Adjust
the sound volume using the voIume control buttons
(O, e)
• To temporarily stop playback, press the I_/11 button.
Press the I_/1| button again to restart playback.
• Even if you stop playback midway and immediately
start recording again, the new image will be recorded
after the last scene on disc or card (the previous
images will not be overwritten).
• image data edited on PC, etc, or the recorded image
may not appear on this DVD video camera/recorder;
atso, the recorded sound may not play back,
depending on the type of image data
• image data recorded on another DVD video camera/
recorder or DVD recorder may not be ptayed on this
DVD video camera/recorder.
• Depending on the amount of data to be played back,
it may take some time for the playback image to
appear
• Do not operate the power switch or remove the card
while the ACCESS/PC or CARD ACCESS indicator is
Iit or blinking: Doing so may damage the card or the
data on card.
58