Filter
Top Products
The DISC EJECT While the DVD video camera/recorder is connected to PC, use
button is not valid when Explorer to right-click the DVD video camera/recorder drive icon
the DVD video camera/ and execute "Eject".
recorder is connected to If DVD-MovieAtbumSE is running, clicking the eject button on
PC. DVD-MovieAIbumSE wi!l open the cover of disc insertion block of
this DVD video camera/recorder: Remove the disc.
When the time stamp of The file system of this DVD video camera/recorder is operated on
file in DVD-RAM is Greenwich Mean Time (GMT), and time lag information has not
viewed on PC, it is been set. With Windows ® as of January, 2005, the time stamp of
different from the actual file viewed on Explorer looks different from the actual recording
recording time, time, The actual recording time will appear for date/time
indication on playback screen,
When DVD- A disc other than DVD-RAM is loaded in drive: DVD-
MovieAIbumSE is MovieAIbumSE cannot be used for media other than DVD-RAM
started, "Disc in Drive X:
cannot be used" Click the "Preference" button in the dialog box, click the "Device
Setting" tab to choose the drive where DVD-RAM disc is loaded
appears, in the "Drive Select" column, and then click "OK",
An image that should Click the "Preference" button at top right of DVD-MovieAIbumSE
have been recorded screen, click the "Device Setting" tab to choose the drive where
does not appear when DVD-RAM disc is loaded in the "Drive Select" column, and then
DVD-MovieAlbumSE is click "OK",
started,
No USB HS (high Make sure that you have already installed the driver provided with
speed) connection even the USB2.0 card.
I47
when USB2.0 card is You will need to install the driver provided by USB2.0 card maker
used, in order to operate the USS2.0 card at HS (high speed).
Executing "Export" on Do not choose "Simple Export": If you do, reading wil! stop
DVD-MovieAtbumSE midway.
will interrupt reading
midway,
When executing • If stills are included in the range of "export", it may take more
"Export" on DVD- time because data must be re-encoded and read.
I47
MovieAIbumSE, itwil! • If "Divide by Chapter" is not chosen, it may take some time
take time to read, because data will be read while being re-encoded.
"Hardware Removal" Exit Windows ® once, and then disconnect the DVD video
results in error, camera/recorder. If your PC uses Windows ® 2000 Professional,
the problem may be solved if you install Windows ® 2000 Service
Pack 3 or later,
172