Filter
Top Products
This section explains about recording of movies and still images, and also basic settings on
DVD video camera/recorder.
Recording Movie
q
Before You Begin /" Insert a recordable DVD-RAM or DVD-R disc into this DVD video camera/
J
recorder.
Pressing REC
once witl start ACCESS/PC
recording; indicator
pressing itonce
again will
temporarily stop
recording
1Remove tile lens cap, and then point tile DVD
video camera/recorder at subject.
2 Turn the DVD camera/recorder oil.
Set tile power switch to "_ll_"to turn tile DVD
video camera/recorder on.
After the ACCESS/PC indicator goes out,
per%rm tile subsequent operation:
4Press tile REC button.
Tile "OI1" mark in tile
viewfinder or on the LCD
screen will change to tile
"0 REC"mark, and recording
will start.
During recording, tile
recording indicator on the
front of DVD video camera/
recorder will light.
Pressing REC again during
recording will set tile DVD
video camera/recorder to
tile recording pause status.
Recording
indicator
i_ When recording is finished, tnrn tile DVD
video camera/recorder off.
3Check the snloject on tile screen (viewfinder
or LCD).
When using tile viewfinder, close the LCD
monitor befbre ptdling out tile viewf_nder.
49