Filter
Top Products
REMOVING DISC
A
/ Press down tile DISC
EJECT button once and
release it.
In a i_lon-lent, the cover
of disc insertion block
will open.
If tile DVD video
calllera/recorder is oil
at this time, the
"EJECT" indicator will blink oil tile LCD
monitor or in the viewfinder.
2Gently open tile cover"
fiflly tmtil it stops. _ _:_
3Remove tile disc.
While pushing down tile center portion of
turntable, pick up tile disc, bolding its edge,
to remove it.
Note:
• Do not remove the battery or disconnect the AC
adapter/charger during removaI of the disc or untit
power is completely turned off: If you do, the disc
cover wilt not open. If this happens, reattach the
battery or AC adapter/charger, push down the DISC
EJECT button once, and then release it
• Do not insert anything other than the 8 cm DVD-RAM
or DVD-R disc into the disc insertion block: Doing so
could cause malfunctions.
• When inserting or removing the disc, BE SURE NOT
to look into the tens in laser pickup: Doing so could
damage your eyesight.
• If the battery remaining level runs out, set the power
switch to "OFF" to remove the disc (see page 42)
Turntable
4Gently push tile section
indicated "PUSH CLOSE"
on the covet" of disc
insertion block, to close tile
cover'.
47