Filter
Top Products
POST Error Codes, Messages and FRU to Failure Information 105
Table 19. Extended POST Error Messages and Codes (continued)
Error
Code
Error Message
Pause on
Boot
FRU/Action
8160 Processor 01: unable to apply
BIOS update
Yes 1. Processor
8161 Processor 02: unable to apply
BIOS update
Yes 1. Processor
8170 Processor P1 :L2 cache Failed Yes 1. Processor
8171 Processor P2 :L2 cache Failed Yes 1. Processor
8180 Bios does not support current
stepping for Processor P1
Yes 1. Processor
8181 Bios does not support current
stepping for Processor P2
Yes 1. Processor
8190 Watchdog Timer failed on last boot No 1. Run Configuration/ Setup
8191 4:1 Core to bus ratio: Processor
Cache disabled
Yes 1. Processor
8192 L2 Cache size mismatch Yes 1. Processor
8193 CPUID, Processor Stepping are
different
Yes 1. Processor
8194 CPUID, Processor Family are
different
Yes 1. Processor
8195 Front Side Bus Speed mismatch.
System Halted
Yes, Halt 1. Processor
8196 Processor Model are different Yes 1. Processor
8197 CPU Speed mismatch Yes 1. Processor
8300 Baseboard Management Controller
failed to function
Yes 1. Check Firmware
2. System Board
8301 Front Panel Controller failed to
Function
Yes 1. Font Panel
84F2 Server Management Interface
Failed
Yes 1. Check Firmware
2. System Board
84F3 BMC in Update Mode Yes 1. Check Firmware
2. System Board
84F4 Sensor Data Record Empty Yes 1. Check Firmware
2. System Board
84FF S
y
stem Event Lo
g
Full Yes 1. Check Configuration/Setup.
2. Clear Event Log