Filter
Top Products
40 xSeries 343 Hardware Maintenance Manual
Server Menu
Feature Option Description
► System Management
<Enter> Enters the System Management submenu.
► Console Redirection
<Enter> Enters the Console Redirection submenu.
► Event Log Configuration
<Enter> Enters the Event Log Configuration submenu.
Service Boot [Disabled]
Enabled
Enables the Service Boot option. Option
automatically resets to disabled on next system boot.
Assert NMI on PERR [Disabled]
Enabled
If enabled, NMI is generated. SERR option needs to
be enabled to activate this option.
Assert NMI on SERR [Enabled]
Disabled
If enabled, NMI is generated on SERR and logged.
BMC IRQ [Disabled]
IRQ5
IRQ11
Sets the BMC IRQ.
After Power Failure [Last State]
Stays Off
Power On
Determines the mode of operation if a power loss
occurs.
Temperature Sensor [Disabled]
Enabled
If enabled, the system will not boot if the ambient
temperature is outside the range specified in
the SDR.
POST Error Pause [Enabled]
Disabled
If enabled, the system will wait for user intervention
on critical POST errors. If disabled, the system will
boot with no intervention, if possible.
Platform Event Filtering [Enabled]
Disabled
Enable/Disable trigger for system sensor events
inside the BMC.
System Management Submenu
Feature Option Description
Board Part Number [A46044-405] Field is informational only.
Board Serial Number [KKC212600176] Field is informational only.
System Part Number Field is informational only.
System Serial Number Field is informational only.
Chassis Part Number Field is informational only.
Chassis Serial Number Field is informational only.
BIOS Version Field is informational only.
BMC Revision Field is informational only.
HSBP Revision [ N/A ] Field is informational only.