Filter
Top Products
Configuration Software and Utilities 57
Updating the FRU/SDR Files
1. Place the diskette containing the BMC FW update files into the diskette drive of your system.
Boot the system while the diskette is in the drive.
2. Select one or two power supplies.
3. The following prompt will appear:
Select the function you wish to perform:
Update FRUs and the SDR repository
Update just the SDR repository
Modify the Asset Tag
Exit
For a standard update, select option 1 to update the FRUs and the SDR
repository.
4. Answer the questions on the screen to update the SDR repository appropriately for your chassis
configuration.
5. When the update is complete, you will be returned to the DOS prompt. Remove the diskette
from the diskette drive.
6. Reboot the system to complete the update process.
Using the Adaptec SCSI Utility
The Adaptec SCSI utility detects the SCSI host adapters on the server board. The utility runs out of
the BIOS and is used to:
• Change default values
• Check and/or change SCSI device settings that may conflict with those of other devices in the
server
Running the SCSI Utility
1. When this message appears on the video monitor:
Press Ctrl-A to run SCSI Utility...
2. Press <Ctrl+A> to run this utility. When it appears, choose the host adapter that you want to
configure.
Another Adaptec utility that is available on the Documentation and Resource CD is the Adaptec
EZ SCSI utility. It is to be installed from diskettes onto a DOS or Windows operating system.