Filter
Top Products
Setting Self Recording on this Camera (DETECT/MAIL
SETTING)
Sets whether to record videos on this camera during detection.
1
Tap “MENU”.
(Operation on this camera)
.
0
The top menu appears.
2
Tap the “Wi-Fi” (
Q
) icon.
(Operation on this camera)
.
3
Tap “DETECT/MAIL” (P).
(Operation on this camera)
.
4
Tap “SELF RECORDING”.
(Operation on this camera)
.
5
Tap “ON” or “OFF” to make a selection.
.
0
Select “ON” to record videos on this camera.
0
Select “OFF” not to record videos on this camera.
Registering the Access Points of the Camera to Connect
(ACCESS POINTS)
There are 4 ways to register the access points (wireless LAN router) for
connection.
Wi-Fi Protected
Setup (WPS)
Registration
This is the easiest way of registration.
Authentication method and wireless LAN setup are
performed automatically in WPS, allowing easy
registration of connection settings between
devices.
Search and
Register
A search is conducted to locate access points.
Select and register an access point from the list of
search results.
Manual
Registration
Enter the name and authentication method
manually to register an access point.
WPS PIN
Registration
Enter the WPS PIN code of the camera to the
access point to register.
Memo :
0
By registering multiple access points, you can change connection to
another access point by tapping on the desired one from the list.
o
Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0
The top menu appears.
2
Tap the “Wi-Fi” (
Q
) icon.
(Operation on this camera)
.
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4
Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)
164