Filter
Top Products
Preparation
8
Preparation
Powering the Camera
from an AC Outlet
You can power the camera from a power outlet
by using the supplied AC adapter.
Note:
• The supplied AC adapter is specially designed
for use with this camera, and should not be used
as a power supply for other equipment.
1 Make sure that the power is off.
2 Open the jack cover (see page 2).
3 Insert the DC plug into the DC IN jack
(1), then plug the AC adapter into a
power outlet (2).
4 Press the Power button until the camera
turns on.
Notes:
• BEFORE REMOVING THE DC PLUG, ALWAYS
STOP OPERATIONS AND TURN THE POWER
OFF. Removing the DC plug during operation
may destroy the card, rendering it unreadable
and unwritable.
• Remove the DC plug from the camera if you will
not use the camera for a long period of time.
• The AC adapter attaches directly, so use close
to an outlet and be careful that it does not
detach.
DC plug
DC IN jack
To AC outlet
Jack cover