Filter
Top Products
Advanced Features
54
Advanced Features
Restoring the Last
Image Deleted
Available in w mode
You can restore an image erased by mistake if
it is the most recent image deleted. Do not
perform any operation, except the procedure
below to recover the image.
1 Set the Mode Dial to “w”, then power
the camera.
2 Press the MENU button until the menu
screen appears.
3 Press l or m to select “~”, then
press the SET button.
4 Press l or m to select “UNDO LAST
IMAGE”, then press the SET button.
• The camera displays the last deleted
image and restores it to the memory
card.
5 Press the MENU button to turn off the
menu screen.
Note:
• You cannot restore an image after performing
any of the operations below.
- Deleting all images
- Deleting another image
- Capturing an image
- Setting the protection or print order
- Formatting the card
- Saving the image with effect
LANGUAGE
VIDEO OUT
RETURN
BEEP
SPEAKER
PC CONNECT
SETTING 2
UNDO LAST IMAGE
Turning off the Speaker
Available in w mode
You can turn off the sound while viewing motion
images or still images with sound data
attached.
1 Set the Mode Dial to “w”, then power
the camera.
2 Press the MENU button until the menu
screen appears.
3 Press l or m to select “~”, then
press the SET button.
4 Press l or m to select “SPEAKER”,
then press the SET button.
5 Press l or m to select “OFF”, then
press the SET button.
Note:
• SPEAKER turns the camera speaker on or off.
When you playback images on a TV screen, the
recorded sound outputs from the TV speakers
regardless of the camera’s speaker setting.
LANGUAGE
VIDEO OUT
RETURN
BEEP
LAST IMAGE
PC CONNECT
SETTING 2
UNDO LAST IMAGE
SPEAKER
OFF
ON
OFF
SPEAKER
ON