Filter
Top Products
Basic Operations
Capturing
14
Basic Operations
Capturing a Motion
Image
You can take a moving picture up to 30
seconds in the same way as you do with a
video camera and record that image on the
card.
1 Insert a card into the camera (see page
9).
2 Remove the lens cap.
3 Set the Mode Dial to “=”.
4 Press the Power button
until the camera turns on.
5 Press the Shutter button fully to
begin capturing.
To pause capturing
Press the Shutter button fully again.
Notes:
• You cannot use the zoom, digital zoom and the
flash for capturing motion images.
• If the card becomes full during motion image
capture, the camera automatically stops
recording.
• The camera captures the motion image in
320K240 pixels.
• See page 18 for how to playback a motion
image.
• The following settings are not available in movie
image mode.
- Self timer
- Exposure value setting
- Gamma setting
Status indicator
Mode dial
Power button
Shutter button