Filter
Top Products
7-8
☞ While using a PCMCIA card to access your pictures is generally faster than
accessing the camera in the Connect mode, you lose some of the
functionality you would have through the Mounter software. For example,
when using MICROSOFT EXPLORER software and a PCMCIA card, you
cannot extract and save audio from pictures that have attached sound. To
access both a picture and its attached sound from the PCMCIA card, you
must use KODAK TWAIN software or KODAK DIGITAL SCIENCE
Picture Easy Software 3.0.
Picture Card Adapter
The DC220 and DC260 use a removable memory card that complies with the
CompactFlash standard. Due to the size of the CompactFlash card, most
PCMCIA card readers do not accept the card as is, but require an adapter card. A
KODAK DIGITAL SCIENCE Picture Card Adapter is available for your memory
card to adapt the 50-pin Picture Card for use with 68-pin PCMCIA-ATA
compatible devices.
☞ For information on ordering a Picture Card Adapter, refer to the
“Accessories” section on page 1-4.
To transfer pictures via the PCMCIA card:
1 Remove the memory card from the camera.
Refer to “Removing the memory card” on
page 2-10.
2 Insert the memory card into the Picture Card
Adapter.
3 Insert the Picture Card Adapter into your
computer.
The Picture Card appears as a drive on your
computer.
.........................
.........................
.........................
.........................