Filter
Top Products
Installation
23
3
Installation
Setting the Menu Using the Remote Control Buttons
Remote
Control
Description
Use these buttons to select the menu options or
adjust the options value.
Select the option or confirm the setting.
Return to the previous menu or level.
1. Press SETUP to display the setup menu.
2. Use
w/s
to select the desired menu item, then press OK to
display the submenu.
3. Use
w/s
to select the desired submenu item, then press OK
to display the setting options.
4. Use
w/s
to select the desired option then press OK to set the
value.
5. Use
a/d
to select the desired setting then press OK to confirm
your selection.
6. Press BACK repeatedly to exit the Setup menu.
If the save message appears, select [OK] and press OK to save
the settings.
NOTE
All the operation explanations are based on using the remote
control.
System settings
Properties
• System Name: Enter the system name by using alphabetic letter,
numeric digit and symbols up to 21 characters. The number of
maximum characters is depends on the language.
• Language: Select a language for the setup menu and
information display.
• Button Beep: Marks up to activate the button beep. The button
beep is activated when using the buttons.
• Resolution: Sets the output resolution of the video signal.
• Configuration Import: Import the system configuration data
from the USB memory stick.
• Configuration Export: Export the configuration data from this
system to the USB memory stick.
• Factory Default: You can reset the system to its original factory
settings. Some options cannot be reset (date, time, daylight
saving, time zone and user password settings).