Filter
Top Products
Installation
31
3
Installation
Record settings
Normal Schedule Recording
A Normal schedule recoding can be activated at preset times, in
a repeating pattern on selected weekdays. The system can record
according to a schedule set by the user. It can also record manually
regardless of date and time. The recording can be made either
continuously or triggered by events (Sensor and motion detection).
The recording schedule screen displays one day of the week
showing the schedule of all channels over a 24-hour period. For
each 1-hour cell block the recording method can be specified. The
recording method for each block is shown in color for easy viewing.
Time Line
Channel numbers
Day of the Week
Recording mode
To Set a Recording Schedule for a Typical
Day of the Week (Normal Schedule)
1. Select a day of the week.
2. Select a recording mode.
• Gray (No recording): No schedule recording.
• Gold (Continuous recording): Recording starts automatically
from the preset time.
• Red (Sensor event recording): Recording starts automatically
when the sensor occurs within a designated time.
• Green (Motion event recording): Recording starts
automatically when motion is detected within a designated
time.
• Yellow (Sensor+Motion recording): Recording starts
automatically when the sensor signal has input or motion
has been detected.
• Gold+Red (Continuous+Sensor event recording): Recording
starts automatically from the preset time. When the sensor
occurs within a designated time, changes the continuous
recording mode to sensor event recording mode and
recording starts automatically.
• Gold+Green (Continuous+Motion event recording):
Recording starts automatically from the preset time. When
the motion is detected within a designated time, changes
the continuous recording mode to motion event recording
mode and recording starts automatically.
• Gold+Yellow (Continuous+Sensor+Motion event recording):
Recording starts automatically from the preset time. When
the sensor signal has been input or motion has been
detected, changes the continuous recording mode to
sensor event recording mode or motion event recording
mode and recording starts automatically.
NOTE
In case you set the motion recording setting on the channel of IP
camera, the recording starts when Video content analysis event as
well as Motion event is occurred.