Filter
Top Products
42
Chapter 5: iGuard Web Manager
Fig.24 iGuard IP Address Settings
“IP Address”
This item determines iGuard IP Address.
“Subnet Mask”
This item sets iGuard Subnet Mask. The value is normally 255.255.255.0
“Gateway”
This item is to set iGuard Gateway.
“Obtain an IP address”
This allows the user to choose either to set iGuard IP Address manually or via
DHCP. iGuard will reboot after the above settings have been changed.
ii. DNS Server IP
Fig.25 iGuard IP DNS Server IP
“Primary DNS Server IP”
This item sets iGuard primary DNS Server IP address.
“Secondary DNS Server IP”
This item sets iGuard secondary DNS Server IP address. iGuard will use the
secondary DNS Server IP address if the Primary DNS Server IP address is not
working.
iii. Port Number
Fig.26 iGuard Port Settings
“HTTP Port Number”
By default the port number is 80. You have to use a different port number here
if you host a website on the same network, if your ISP blocks port 80 traffic, or if
you have multiple iGuard on the network
“Communication to Camera Port Number”