Filter
Top Products
8
Chapter 4: iGuardware
Chapter 4: iGuardware
iGuardware is a collection of two utility programs: iGuard Utility and iGuardview. You
can use the iGuard Utility to quickly setup multiple iGuard units and you can use
iGuardview to monitor multiple cameras, and maybe most importantly to perform
motion tracking (V2.5 and above only). If you have a DHCP server on the network, the
iGuard will obtain an IP address automatically, and you can enter this IP address in IE
to launch the web manager (Chapter 5).
4.1 Installing iGuardware
Insert the software CD (or download from www.iguard.com) and click on setup if
autorun does not start.
Fig.3 iGuardware Installation
" iGuard Utility - This is a program that helps the user perform quick
installation. It will detect the current configuration and take the user through
the necessary network setup.
a. Click the ‘iGuard Utility’ button to start installation.
b. After the step by step installation is completed, the iGuard Utility group
will appear in Windows ’Start’ Â ‘Program Group’. “iGuard” Click this to
start the program.
" iGuardView - This is a windows based program designed to allow user to
control a large number of iGuard module located either in a LAN or on a
WAN.
" Read User’s Manual - Click to read iGuard’s User Manual. You will need
Adobe Acrobat Reader v5.0 or higher.