Filter
Top Products
76
Appendix A: Router Configuration
9. Click on Add to save these settings.
10. Under the first box, next to the Enable checkbox, type in: iGuard Cam.
11. Under PC (Server), select your camera or the camera’s IP address from the list. If
the camera is not listed, select the link titled “My PC is not listed.”
12. Leave Protocol as TCP.
13. Under Internal Port No type in: 9001
14. Under External Port No type in: 9001
15. Click on Add to save these settings. iGuard should now be configured to work with
your router and be accessible from the Internet.