Filter
Top Products
35
Black level (total pedestal) adjustment
Black level (total pedestal)
adjustment
The black level can be adjusted when using a multiple
number of cameras including the unit. Ask your dealer to
perform this adjustment.
(Use an oscilloscope or waveform monitor for the
adjustment.)
Adjust the black level in accordance with the units and
devices used.
When performing the operations using the
accessory wireless remote control
When the accessory wireless remote control is used, the
black level can be adjusted only when the user mode has
been established.
1 Press the [M/IRIS] button.
Set the iris to the manual mode.
2 Press the [IRIS–] button.
The lens iris is stopped down.
3 Select the user mode following the steps
in “Selecting the shooting modes (scene
files)” (page 20).
At this time, keep the “User Mode Set” sub-menu on
the display.
User Mode Set
Brightness Set
Color Set
G/L, Setup Set
Sharpness(DTL) Set
Other Set
Initialize
Return
4 Press the [] or [] button to make
“Color Set” blink.
5 Press the [] or [] button.
The “Color Set” sub-menu is displayed.
Color Set
Chroma Level +1
White Bal AWC A
Pedestal +1
Painting
R Gain +1
B Gain +1
Return
6 Press the [] or [] button to make the
“Pedestal” value blink.
7 Press the [] or [] button to change the
value.
Adjust the black level to a value of 5 IRE (0.035 V) or
7.5 IRE (0.050 V).
8 Press the [MENU] button for two
seconds.
The menu display is exited.
9 If necessary, press the [A/IRIS] button to
adjust the iris automatically.