Filter
Top Products
57
Video
Symptom Cause and remedial action Reference pages
No pictures are
displayed or
the pictures are
disturbed
Has the unit been connected properly to the other connected
devices?
Installation
Instructions
P
.
28 to 31
If the system is configured in suc
h a way that the picture is also
switched when the camera to be operated is selected, has the
correct camera been selected?
P.18
Has the video signal setting been selected correctly?
Installation
Instr
uctions
P.18 to
20
The picture is flipped
vertically
Has the stand-alone (Desktop) installation setting been selected
correctly?
Installation
Instructions
P
.
21
Is the automatic picture flipping function now in operation?
P
.43
Multiple color bands
(color bars) are
displayed
Switch to the camera picture.
P.23
The menu screen is
displayed
Exit the menu.
P.40 to 42
No auto focusing
Is the focus set to manual?
Auto focusing is initiated as soon as the focus is set to auto.
P.
23
In some situations, it ma
y be hard to focus at the auto setting.
In cases like this, select the manual setting, and focus manually.
P.
25
Something is wrong
with the coloring of
the pictures
Activate the ATW (Auto tracking white adjustment) function.
P.32
In some situations,
the proper colors may not be reproduced using
the ATW function.
In cases like this, proceed with the white balance adjustment.
P.31
The pictures are too
light or too dark
Either select the auto setting for the iris or select the manual setting
and adjust the iris manually.
P.
25
The pictures ma
y be dark if the video signal cables are too long
because this will cause signal attenuation.
In cases lik
e this, connect the cable compensator (such as the
AW-RC400).
—
Troubleshooting