Filter
Top Products
36
When doing the adjustment
using the controller
When the AW-RP655 is connected:
1 Press the [IRIS] button several times to
turn off its lamp.
Set the iris to the manual ([MANU]) mode.
2 Turn the [FOCUS/IRIS] dial to stop down
the lens iris.
3 Press the [R/B GAIN/PED] button a
number of times so that the “PEDESTAL
TOTAL” item is displayed on the LCD
panel.
4 Turn the jog dial (main) and adjust the
black level to 5 IRE (0.035 V) or 7.5 IRE
(0.050 V).
5 If necessary, adjust the iris automatically.
Press the [IRIS] button several times to turn on
its lamp.
When the AW-RP555 is connected:
1 Press the [IRIS] button several times to
turn off its lamp.
Set the iris to the manual ([MANU]) mode.
2 Turn the [LEVEL] dial of [IRIS] to stop
down the lens iris.
3 The same operations as those in steps 3
to
8 of “When performing the operations
using the accessory wireless remote
control” can be performed following the
operation procedure for “Basic menu
operations” (page 42).
When the AW-RP400/AW-CB400 is connected:
(The following operations are performed using the
AW-
CB400.)
1 Press the [IRIS] button several times to
turn off its lamp.
Set the iris to the manual ([MANU]) mode.
2 Turn the [IRIS] dial to stop down the lens
iris.
3 Turn the [PED] dial and adjust it so that
the pedestal level is set to 5 IRE (0.035 V)
or 7.5 IRE (0.050 V).
4 If necessary, adjust the iris automatically.
Press the [IRIS] button several times to turn on
its lamp.
Alternatively, the same operations as those in steps
3 to
8 of “When performing the operations using the accessory
wireless remote control” can be performed following the
operation procedure for “Basic menu operations” (pages 40
to 42
).
Black level (total pedestal) adjustment