Filter
Top Products
41
When performing the operations using the
accessory wireless remote control
1 Press the [CAM1], [CAM2], [CAM3] or
[CAM4] button to select the unit which is
to be operated.
2 Press the [MENU] button for two seconds.
The main menu is displayed.
3 Press the [] or [] button to make the
item to be selected blink.
Each time the [] or [] button is pressed, the blinking
item changes.
4 Press the [] or [] button.
The sub-menu of the selected item is displayed.
(Some sub-menu items have a sub-menu of their own.)
5 Press the [] or [] button to make the
item to be set or the setting blink.
Each time the [] or [] button is pressed, the blinking
item changes.
When
“Return” is made to blink and the [] or []
button is pressed, operation returns to the previous
menu.
While the men
us are displayed, the [] and [] button
have the same functions.
Bear in mind, however, that if the [] button is pressed
when it is possible to change a value, the value will be
changed by the button.
6 Press the [] or [] button to change the
setting.
7 After the setting has been completed,
press the [MENU] button for two seconds.
The menu display is exited.
When performing the operations
using the controller AW-RP655
1 Press one of the [1] to [5] buttons of
[CONTROL/PREVIEW MONITOR OUT
SEL] to select the unit which is to be
operated.
2 Press the [MENU] button.
The display on the LCD panel of the AW-RP655 is set
to the menu mode.
3 Turn the jog dial (main) and display
“CAMERA SETTING” on the LCD panel.
4 Press the [OK] button.
Display “
OPEN CAMERA MENU?
OK Key” on the
LCD panel.
5 Press the [OK] button again.
The main menu is displayed on the monitor.
6 Press the jog dial (main) to make the item
to be selected blink.
Each time the jog dial (main) is pressed, the blinking
item changes.
7 Turn the jog dial (main) counterclockwise.
The sub-menu of the selected item is now displayed.
(Some sub-menu items have a sub-menu of their own.)
8 Press the jog dial (main) to make the item
to be set or the setting blink.
Each time the jog dial (main) is pressed, the blinking
item changes.
When the
“Return” is made to blink and the jog dial
(main) is turned counterclockwise, operation returns to
the previous menu.
9 Turn the jog dial (main) to change the
setting.
10
After the setting has been completed,
press the [MENU] button or [R/B GAIN/
PED] button.
The menu display is exited.
Basic menu operations