Filter
Top Products
104
VQT2M75
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
jWhen the 1080/60p recording mode is turned on/off during Motion Picture Recording
Mode
jWhen [SELECT VIDEO] is touched during Motion Picture Playback Mode
You still can listen to the 5.1 channel sound recorded from the internal microphones when this unit
is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini cable.
Please read the AV amplifier and TV operating instructions for how to connect this unit to the
AV amplifier and TV.
≥ If you connect this unit to a Panasonic AV amplifier that are compatible with VIERA Link,
linked operations (VIERA Link) become possible. (l 105)
≥ Audio recorded when [MIC SETUP] is set to [STEREO MIC] or recorded from an external
microphone is in stereo (2 ch).
AV multi connector output setting can be changed.
Changing the component output setting
Connecting with a HDMI mini cable
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]
Listening in 5.1 channel sound
Connecting with the AV multi cable
: [SETUP] # [AV MULTI] # desired setting
[COMPONENT]: When connecting to the component terminal
[AV OUT]: When connecting to the video terminal
: [SETUP] # [COMPONENT OUT] # desired setting
[480i]: When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with
1080i. (Playback is in high definition quality.)
HDC-TM700&HS700P&PC-VQT2M75_mst.book 104 ページ ２０１０年２月２３日 火曜日 午前１０時３４分