Filter
Top Products
126
VQT2M75
≥ When the unit is connected to a PC, its power cannot be turned off.
Disconnect the USB cable, before turning this unit off.
≥ Do not disconnect the USB cable or the AC adaptor while the access lamp is on or card
access icon ( ) appears on the unit screen.
≥
Do not disconnect the USB cable or the AC adaptor while the access lamp is on or built-in
memory access icon ( ) appears on the unit screen.
≥
Do not disconnect the USB cable or the AC adaptor while the HDD access lamp is on or
HDD access icon ( ) appears on the unit screen.
≥ When performing reading/writing between a PC and an SD card, be aware that some SD
card slots built into PCs and some SD card readers are not compatible with the SDHC
Memory Card or SDXC Memory Card.
∫ To disconnect USB cable safely
1 Double click the icon in task tray displayed on the PC.
≥ Depending on your PC’s settings, this icon may not be displayed.
2 Select [USB Mass Storage Device] and click [Stop].
3
Verify [MATSHITA HDC-TM700/SD USB Device] or [MATSHITA HDC-TM700/MEM
USB Device] is selected and click [OK].
Verify [MATSHITA HDC-HS700/SD USB Device] or [MATSHITA HDC-HS700/HDD
USB Device] is selected and click [OK].
HDC-TM700&HS700P&PC-VQT2M75_mst.book 126 ページ ２０１０年２月２３日 火曜日 午前１０時３４分