Panasonic HDC-HS700P/PC Camcorder User Manual


 
51
VQT2M75
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (
l
109, 117)
1 Touch [FORMAT MEDIA].
2
Touch [SD CARD] or
[Built-inMemory].
Touch [SD CARD] or [HDD].
When formatting is complete, touch [EXIT] to exit the message screen.
Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. (l 144)
Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/
transferred. (l 142)
Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
The amount of space left on the SD card, the built-in memory and HDD can be checked.
(Only when the mode is at the position)
Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory/HDD.
Touch [EXIT] or press the MENU button to close the indication.
The SD card, built-in memory or built-in HDD requires some space to store information and
manage system files, so the actual usable space is slightly less than the indicated value.
The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000
bytes. The capacities of this unit, PCs and software are expressed as
1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the
capacity appears to be smaller.
Perform the touch screen calibration if a different object to the one touched is selected.
1Touch [CALIBRATION].
Touch [ENTER].
2Touch the [_] that appears on the screen with the supplied stylus pen.
Touch [_] in sequence (up left # down left # down right # up right # center).
3 Touch [ENTER].
Calibration cannot be performed when the LCD monitor is turned 180o.
[FORMAT MEDIA]
Use this unit to format media.
Formatting built-in memory or HDD is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
[MEDIA STATUS]
[CALIBRATION]
HDC-TM700&HS700P&PC-VQT2M75_mst.book 51 ページ 2010年2月23日 火曜日 午前10時34分