Filter
Top Products
80
VQT2M75
Recording is done continuously at the rate of 60 still pictures per second.
Use this function to record an object with fast movement.
≥ Change the mode to .
1 Select the menu.
2 Press the button.
≥ flashes in red during recording.
≥ First press the button halfway, then
press it fully to set the focus and record. It
will automatically focus if you press fully
once, so it is convenient when recording
objects moving back and forth.
3 Touch [Record] or [Delete].
[Record]: Pictures are stored.
[Delete]: All pictures are deleted.
4
(Only when [Record] is selected in step 3)
Touch [REC ALL] or [SELECT].
[REC ALL]: All pictures are stored.
[SELECT]: Pictures are stored by
specifying range.
5 (Only when [SELECT] is selected in
step 4)
Touch the range of pictures that will be
stored.
≥ Previous (Next) page is displayed by
touching / .
* Only select the picture for start point if only
1 picture is to be stored.
≥ A confirmation message is displayed
when [Enter] is touched after selecting the
start point and finish point.
Touch [YES] to store the pictures.
≥ If you turn off the power or change the mode, this function is canceled.
≥ The maximum number of times you can record on a media is 15.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ Color balance and brightness on the screen may change with some light sources such as
fluorescent lamps.
≥ Image quality is different from ordinary still picture recording.
[HI-SPEED BURST]
: [PICTURE] #
[HI-SPEED BURST] # desired setting
[OFF]:
Cancel the setting.
[60 frames/sec]:
180 still pictures are recorded
continuously at the rate of 60 per second.
The picture size is (1920k1080).
2.1
M
A Start point
*
B Finish point
HDC-TM700&HS700P&PC-VQT2M75_mst.book 80 ページ ２０１０年２月２３日 火曜日 午前１０時３４分