Filter
Top Products
136
VQT2M75
Problem Check points
Item other than the
touched one is
selected.
≥ Calibrate the touch screen. (l 51)
The remote control
does not function.
≥ [REMOTE CONTROL] of the [SETUP] is [OFF].
(l 53)
≥ The button-type battery of the remote control may
have run out. Replace it with a new button-type
battery. (l 53)
The remaining time
indication or the
elapsed time indication
is not shown.
≥ [DISPLAY] of the [SETUP] is [OFF]. (l 46)
The unit arbitrarily
stops recording.
≥ Use an SD card that can be used for motion picture
recording. (l 27)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card, built-in memory or HDD. (l 51)
≥ If [AGS] is [ON], record in the normal horizontal
position or set [AGS] to [OFF]. (l 71)
≥
If the unit is exposed to strong vibrations or shocks
while recording on HDD, recording may stop to
protect the HDD. If the unit is used in a place with
loud sounds, the recording may stop due to sound
vibrations. Recording data on an SD card is
recommended in these places.
Auto focus function
does not work.
≥ Switch to Intelligent Auto Mode.
≥ If you are trying to record a scene which is hard to
bring into focus in Auto Focus Mode, use the Manual
Focus Mode to adjust the focus. (l 40, 85)
Color balance of
images is strange
when recording in a
place such as a
gymnasium.
≥ In a place with multiple light sources, such as a
gymnasium or a hall, set the white balance setting to
(Indoor mode2). If you cannot record clearly
with the (Indoor mode2), set it to (Manual
adjustment mode). (l 83)
HDC-TM700&HS700P&PC-VQT2M75_mst.book 136 ページ ２０１０年２月２３日 火曜日 午前１０時３４分