Panasonic HDC-HS700P/PC Camcorder User Manual


 
89
VQT2M75
If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
If playback of a motion picture is stopped, appears on the thumbnail view of the stopped
scene.
The memorized resume position is cleared if you turn off the power or change the mode.
(The setting of [RESUME PLAY] does not change.)
You can zoom in by touching a still picture during playback.
1 Touch the part you wish to zoom in on during still picture playback.
The still picture is zoomed in on, centering on the part you touched. With each touch, you
zoom in further. (k1 # k2 # k4)
2 Move your position on the zoomed still
picture by touching 3/4/2/1.
The location of the zoom displays for about 1 second when
zooming in (zooming out) or moving the displayed location.
The more picture is enlarged, the more its quality
deteriorates.
Zooming out from the zoomed still picture
Touch to zoom out. (k4 # k2 # k1)
Touch to return to normal playback (k1).
You can also perform zoom operations using the zoom lever or the adjust zoom buttons.
Resuming the previous playback
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
Zooming in on a still picture during playback (Playback
zoom)
A Displayed location of
the zoom
HDC-TM700&HS700P&PC-VQT2M75_mst.book 89 ページ 2010年2月23日 火曜日 午前10時34分