Panasonic HDC-HS700P/PC Camcorder User Manual


 
115
VQT2M75
Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 110)
Formatting discs
This is for initializing DVD-RAM, DVD-RW and +RW discs.
Please be aware that if a disc is formatted, then all the data recorded on the disc will
be erased. Back up important data on a PC etc.
When formatting is complete, touch [EXIT] to exit the message screen.
Connect this unit and the DVD burner to format discs.
You may no longer be able to use the discs if you format them on another device such as a
PC etc.
Auto protect
You can protect (write protect) a DVD-RAM disc when copying motion pictures in high
definition picture quality or DVD-RW disc when copying motion pictures or still pictures in
high definition picture quality to the disc.
1 Select the menu.
If a disc that you copied to is inserted in another device without protecting it, a message
may be displayed prompting you to format the disc. We recommend setting [AUTO
PROTECT] to [ON] in order to prevent accidental deletion.
2 Copy to the disc. (l 111)
After copying, the disc is write protected.
To release the disc protection
Touch [EXIT] and close the message screen after the auto protection is released.
Displaying disc information
Information such as the type of recorded disc, the number of recorded scenes and whether
or not the disc is finalized is displayed.
Touch [EXIT] to exit the information screen.
Managing the copied disc
: [DISC SETUP] # [FORMAT DISC]
: [DISC SETUP] # [AUTO PROTECT] # [ON]
[DISC SETUP] # [CANCEL PROTECT]
: [DISC SETUP] # [DISC STATUS]
HDC-TM700&HS700P&PC-VQT2M75_mst.book 115 ページ 2010年2月23日 火曜日 午前10時34分